If you’re looking for an adhesive that is quick drying 5 – 6 seconds, durable in different humidity, retention of 5 – 6 weeks and thin viscosity to reduce clumping, low fumes, ISO approved, then look no further than Elleebana Ultra Bond type. 

Before using your adhesive

Shaking your adhesive for the minimum of 1 minute before use will prepare the consistency of the adhesive and allow ingredients to be perfectly dispensed without separation in each drop.  The best way to shake your adhesive is to remove the lid of the product and insert the stopper/pin provided with each adhesive (you will find these in the adhesive bag) before shaking – this stops any adhesive from building up in the lid of your bottle.

Storage

Always store the adhesive away from sunlight, moisture, heat and ensure the lid is sealed well between uses.  Storing the adhesive in an air-tight container with a silica pack (also found inside each bag of adhesive) to draw out moisture is recommended.  Do not store the adhesive in the fridge after opening – once the seal has been broken on the cap condensation can form on the bottle and the reintroduction of the adhesive to room temperature from the cool environment of a refrigerator, can result in moisture curing the adhesive inside the bottle.  You can however, choose to store your adhesive in the fridge with a higher chill temperature than an average refrigerator (perhaps a small bar fridge is an ideal investment for the treatment room).  If the fridge is allowed to stay at 17-21 degrees Celsius then the condensation will be less likely to form on the outside of the adhesive as the change in temperature from one environment to the next is not as dramatic.  You can store the adhesive in a freezer before opening to prolong the shelf life but be sure to thaw out the bottle well before opening by letting the bottle sit in room temperature for a minimum of 4 hours.